|
|
| Mailing Address |
 |
UKF Stainless Ltd
12 Buntsford Park Road
Bromsgrove
Worcestershire
B60 3DX
|
|
| Telephone / Fax |
|
| Tel: |
01527 578686 |
| Fax: |
01527 837792 |
|
|
| Email |
|
 info@ukfstainless.co.uk |
|
|
|
 |
 |
1.4016
|
|
|
Introduction:
Low carbon chromium steels are ferritic and cannot
be hardened other than by cold work. Their yield and
tensile strength properties are similar to 18Cr10Ni
grades but their ductility and impact resistance are
generally much inferior. Some cold forming operations
are also more difficult. Minimum impact values are
not included in Euronorm or ASTM and are subject to
agreement.
X 6 CrTi 12 has a ductile-brittle
transition temperature near or above room temperature
and that of its coarse grained weld zones is higher.
Very low carbon versions give some improvement.
This steel is slow rusting and subject to pitting
and crevice corrosion in aerated seawater. Scaling
temperatures are in the region of 750-800°C.
Composition:
| Element |
Minimum
(%) |
Maximum
(%) |
| Chromium |
16.00 |
18.00 |
| Nickel |
- |
1.00 |
| Manganese |
- |
1.00 |
| Carbon |
- |
0.08 |
|
Similiar Specifications:
ISO 683/13 8
16-18%Cr, <1%Ni, <1%Mn, <0.08%C
EURONORM X6 Cr 17
16.0-18.0%Cr, <1.0%Ni, <1.0%Mn, <0.08%C
ASTM UNS S43000 430
16-18%Cr, <0.75%Ni, <1.0%Mn, <0.12%C
BS 430S17
16-18%Cr, <1%Ni, <1%Mn, <0.08%C
DIN X6 Cr 17 1.4016
15.5-17.5%Cr, <1%Mn, <0.08%C
JIS SUS 430
16-18%Cr, <1%Mn, <0.12%C
Product Forms:
Plate,sheet & strip
EURONORM X6
Cr 17 88-86/2
ASTM UNS S43000
430 176, 240, 480
BS 430S17 1449/2
DIN X6
Cr 17 1.4016 17440, 17441
JIS SUS 430 4304, 4305, 4307
Bar & long products
EURONORM X6
Cr 17 88-86/1
ASTM UNS S43000
430 276, 479
BS 430S17 970/1
JIS SUS 430 4303, 4308, 4318
Forgings & others
EURONORM X6
Cr 17 88-86/1
ASTM UNS S43000
430 314, 473, 182, 815
BS 430S17 970/1
JIS SUS 430 3214
Tube and/or pipe
DIN X6
Cr 17 1.4016 17455, 17456
JIS SUS 430 3463, 3446
General
ISO 683/13 8
|
|
|
Page Last Modified: 7/04/06 16:30
|
|
|
|
|
