 |
 |
1.4436
|
|
|
Introduction:
These two grades are part of the family of 17%Cr 12-13%Ni
steels containing between 2 and 3% Mo (S316xx series).
These grades are nitrogen strengthened with 2.0-2.5%
Mo or 2.5-3.5%Mo. After 18Cr10Ni (304xx) type steels,
these 17Cr12NiMo (316xx) grades are the most widely
used austenitics. In the damp industrial or coastal
atmospheres of Europe, they perform better than 18Cr10Ni
(304xx) and ferritic grades. In low temperature seawater
they offer limited resistance to pitting but are susceptible
to crevice attack (mean
PREN about 25-27). Their short- and long-time properties
at elevated temperatures are also superior to those
of comparable 18Cr10Ni grades.
Metallurgy:
Conditions where the steels are not quickly
taken through the temperature range 900-500°C
(eg. slow cooling, heat-treatment, service exposure,
high heat input welding ) can allow precipitation
of chromium carbides and sometimes embrittling sigma
formation.
Where sensitization to intergranular corrosion around
these carbides is unacceptable, consideration should
be given to the low carbon (0.03%C max) grades and
to those stabilized with either Ti or Nb.
Composition:
| Element |
Minimum
(%) |
Maximum
(%) |
| Chromium |
16.50 |
18.50 |
| Nickel |
11.00 |
14.00 |
| Molybdenum |
2.50 |
3.00 |
| Manganese |
- |
2.00 |
| Carbon |
- |
0.07 |
|
Similiar Specifications:
ISO 2604 61
ISO 683/13 20a
16.5-18.5%Cr, 11-14%Ni, 2.5-3.0%Mo, <2%Mn, <0.07%C
EURONORM X5 CrNiMo 17
13 3
16.5-18.5%Cr, 11.0-14.0%Ni, 2.5-3.0%Mo, <2.0%Mn,
<0.07%C
ASTM UNS S31600 316
16-18%Cr, 10-14%Ni, 2.0-3.0%Mo, <0.10%N, <2%Mn,
<0.08%C
BS 316S33
16.5-18.5%Cr, 11-14%Ni, 2.5-3.0%Mo, <2%Mn, <0.07%C
DIN X5 CrNiMo 17 13 3
1.4436
16.5-18.5%Cr, 11-14%Ni, 2.5-3.0%Mo, <2%Mn, <0.07%C
JIS SUS 316
16-18%Cr, 10-14%Ni, 2.0-3.0%Mo, <2%Mn, <0.08%C
Applications:
Architectural cladding, doors, windows and fittings
Street furniture
Offshore modules
Tanks and piping of chemical tankers
Production, storage and land-based transport of chemicals,foods and beverages
Pharmaceutical, synthetic fibre, paper and textile
industries
Pressure vessels, cryogenic equipment, high temperature
plant.
Product Forms:
Plate,sheet
& strip
ISO 2604 /4 P61
EURONORM X5
CrNiMo 17 13 3 88-86/2, 88-86/3
ASTM UNS S31600
316 167, 240, 480
BS 316S33 1449/2, 1501/3
DIN X5
CrNiMo 17 13 3 1.4436 17440, 17441
JIS SUS 316 4304, 4305, 4307
Bar & long products
EURONORM X5 CrNiMo 17 13 3 88-86/1
ASTM UNS S31600
316 276, 479, 484
BS 316S33 970/1, 1502
DIN X5
CrNiMo 17 13 3 1.4436 17440
JIS SUS 316 4303, 4308, 4318, 4311
Forgings & others
EURONORM X5
CrNiMo 17 13 3 88-86/1
ASTM UNS S31600
316 314, 473, 484, 182, 403
BS 316S33 970/1, 1503
DIN X5
CrNiMo 17 13 3 1.4436 17440
JIS SUS 316 3214, 4319
Tube and/or pipe
ISO 2604 /2 TS61, /5 TW61
BS 316S33 3605
DIN X5
CrNiMo 17 13 3 1.4436 17455, 17456, 17457, 17458
JIS SUS 316 3463, 3459
ASTM UNS S31600
316 213, 249, 269, 270, 271, 450, 511, 554, 632,688
Pipe
ASTM UNS S31600
316 312, 358, 376, 409, 430, 530, 813, 814
General
ISO 683/13 20a
BS 316S33 5500
|
|
|
Page Last Modified: 7/04/06 17:20
|
|
|
|
